Filter
Top Products
Electrical connection
This machine is supplied ready for con-
nection to an a.c. single phase 230 -
240 V, 50 Hz supply. The machine is
supplied with a 2 m long mains cable
with moulded plug. The voltage, rated
load and fuse rating are given on the
data plate. Please ensure that these
match the household mains supply.
All electrical work should only be car-
ried out by a suitably competent per-
son, in accordance with national and
local safety regulations.
Connection should be made via a
fused plug and a suitable switched
socket which is easily accessible. For
extra safety it is advisable to install a re-
sidual current device (RCD) with a trip
current of 30 mA.
Important
The wires in the mains lead are col-
oured in accordance with the following
code:
Green/yellow = earth
Blue = neutral
Brown = live
As the colours of the wires in the mains
lead of this appliance may not corre-
spond with the coloured markings ident-
ifying the terminals in your plug, pro-
ceed as follows:
The wire which is coloured green and
yellow must be connected to the termi-
nal in the plug which is marked with the
letter E or by the earth symbol z or col-
oured green or green and yellow.
The wire which is coloured blue must
be connected to the terminal which is
marked with the letter N or coloured
black.
The wire which is coloured brown must
be connected to the terminal which is
marked with the letter L or coloured red.
WARNING
THIS APPLIANCE MUST BE
EARTHED
Non-rewireable plugs BS 1363
If this machine or appliance is fitted
with a non-rewireable plug, the follow-
ing information applies:
If the socket outlets are not suitable for
the plug supplied with this product, it
must be cut off and an appropriate
plug fitted.
The plug cut from the flexible cord
should be disposed of and on no ac-
count be inserted into any socket else-
where in the house (electric shock ha-
zard).
The fuse cover must be refitted when
changing the fuse, and if the fuse
cover is lost, the plug must not be used
until a suitable replacement is ob-
tained. The colour of the correct re-
placement is that of the coloured insert
in the base of the plug, or the colour
that is embossed in words in the base
of the plug (as applicable to the design
of plug fitted). The correct fuse rating of
the replacement fuses that are ASTA
approved to BS 1362 should be fitted.
Replacement fuse covers may be pur-
chased from your local electrical sup-
pliers, or Miele Service Agent.
Electrical connection
43