Filter
Top Products
Cleaning the filter in the water
inlet
The washing machine has two filters to
protect the water inlet valves.
The accessible filter in the union in the
open end of the inlet hose should be
cleaned about every six months, or
after an interruption to the external
water supply.
First turn off the stopcock.
Unscrew the threaded union con-
necting the free end of the inlet hose
to the stopcock.
Remove the rubber seal from the re-
cess.
Using pointed pliers, take hold of the
plastic filter bar, remove the filter and
clean.
Put the filter and seal back in the
reverse order and reconnect the
hose.
Turn on the stopcock and check the
connection is water tight. If water drips
out, tighten the connection.
Never forget to put the filter back in
place after cleaning it.
Cleaning and care
29