Filter
Top Products
Programme chart
27
Express 20 76* cold to 40°C Max. load 3.5 kg
Use for Cotton and minimum iron garments that have hardly been worn or
are only very lightly soiled.
Note The Short extra option will be activated automatically.
Maintenance prog. 75°C Empty
With frequent washing at low temperatures, there is the danger of a build-up of
bacteria in the washing machine.
Cleaning the washing machine will significantly reduce bacteria, fungus and
biofilm and help prevent the build-up of unpleasant odours.
Notes
–
Optimum results can be achieved by using Miele machine
cleaner. Alternatively a universal powder detergent can be
used.
–
Dispense the machine cleaner or universal powder via the
detergent compartment.
–
Do not load any laundry. The drum must be empty for the
maintenance programme.
Proofing 40°C Max. load 2.5 kg
Use for Treating microfibre fabric, skiwear, and table linen made from
mainly synthetic fibres to provide a water and stain resistant finish.
Notes
–
The items should be freshly laundered and spun or dried before
proofing.
– For best results, the items should be heat-treated afterwards,
either in a tumble dryer or by ironing.
Outerwear cold to 40°C Max. load 2.5 kg
Use for Outerwear made from membrane fabric such as Gore-Tex
®
,
SYMPATEX
®
, WINDSTOPPER
®
etc.
Notes
–
Zip up jackets before washing.
–
Do not use fabric conditioner.
–
If wished these garments can also be re-proofed using the
Proofing programme. Proofing should not be done every time
the garment is washed.