Filter
Top Products
Final spin speed
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons programme, an additional rinse
is introduced.
To omit the final spin (Rinse hold)
^
Select the Rinse hold (e) setting
using the Spin speed button. The
laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
–
To start the final spin
:
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the Start/Stop button.
– To end the programme
:
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit rinse and interim spin and
the final spin (No .)
^
Select the No . setting using the
Spin speed button.
The laundry is not spun after the final
rinse. The water will drain away and the
machine will go straight into the anti-
crease stage.
With some programmes an additional
rinse is introduced if this setting is
selected.
Spinning
24
Programme rpm
Cottons 1600
Minimum iron 1200
Delicates 600
Woollens / 1200
Proofing 1000
Express 20 1600
Automatic plus 1200
Dark garments / Denim 1200
Shirts 600
Spin 1600
Separate rinse/Starch 1200
Maintenance prog. –
Hygiene 1600
Outerwear 800
Down duvets 1200