Filter
Top Products
Maximum water level
The water level for rinsing is automat
-
ically raised to the maximum level
where rinse results are particularly
important.
It is effective for the rinses in the follow
-
ing programmes:
- COTTONS
- MINIMUM IRON
- QUICK WASH
- MIXED WASH - Poly/Cottons
Before the "Maximum water level" pro-
grammable function can be selected
you must first select programming
mode.
Selecting programming mode
A The machine must be switched off
and the drum door closed. The
programme selector must point to
"Finish".
B Press the additional option buttons
"Short" and "Water plus" at the same
time and hold pressed in and:
C . . . switch the machine on with the
"I-ON/0-OFF" button.
D Let go of all these buttons.
The indicator light "Main wash" flashes
in the sequence display.
Selecting the programmable function
To select the "Maximum water level"
programmable function: turn the
programme selector to -
DELICATES 40 °C ***.
Activating
To activate "Maximum water level" press
the "START" button once.
The "Rinses" light comes on in the se
-
quence display.
Storing in memory
To store the "Maximum water level" pro-
grammable function in the memory
SWITCH the machine OFF with the
"I-ON/0-OFF" button.
The "Maximum water level" programma-
ble function is now stored in the ma-
chine’s memory and is effective in the
programmes described above until
such time as you may wish to deacti-
vate it.
Deactivating
To deactivate the use of a maximum
water level in the rinses repeat the pro
-
cedure given above from point A as far
as the *** shown above. Press the
START button and the "Rinses" indicator
light will go out. The function is now de
-
activated. Store in memory by pressing
the "I-ON/0-OFF" button.
Programmable functions
33