Filter
Top Products
Water plus system
The "Water plus" button offers four
options, increasing water level and /
or bringing in an extra rinse cycle. To
activate the option press the "Water
plus" button when selecting your
wash programme before pressing the
START button.
Option 1
Increase in the rinse water level in the
COTTONS, MINIMUM IRON, QUICK
WASH and MIXED WASH - Poly/Cottons
programmes, where for example rinse
results are particularly important.
Option 2
Increase in the water level in main wash
and rinses for COTTONS, MINIMUM
IRON, QUICK WASH, Silk and MIXED
WASH particularly for fabrics that need
special care, or where extra attention
must be given to dissolving detergent.
This option is already set when the ma
-
chine is delivered from the factory.
Option 3
An extra rinse cycle is introduced to the
COTTONS programme, e.g. when rinse
results are particularly important.
Option 4
Increase in the water level in the main
wash and rinses for the COTTONS,
MINIMUM IRON, QUICK WASH, Silk
and MIXED WASH - Poly/Cottons
programmes. An extra rinse cycle is in
-
troduced in the COTTONS programme -
useful for those whose skin is sensitive
to detergent.
Before the "Water plus system" pro
-
grammable function can be selected
you must first select programming
mode.
Selecting programming mode
A The machine must be switched off
and the drum door closed. The
programme selector must point to
"Finish".
B Press the additional option buttons
"Short" and "Water plus" at the same
time and hold pressed in and:
C . . . switch the machine on with the
"I-ON/0-OFF" button.
D Let go of all these buttons.
The indicator light "Main wash" flashes
in the sequence display.
Selecting the programmable function
To select the "Water plus system" pro-
grammable function turn the
programme selector to
- DELICATES 30 °C .
The indicator lights in the sequence
display correspond to the four options
available. As Option 2 has been set at
the factory, when the programme selec
-
tor is turned "DELICATES 30 °C ", the in
-
dicator light for Option 2 "Rinse hold"
will come on.
...Turn to next page . . .
Programmable functions
34