Filter
Top Products
Before using the machine for the first
time ensure that it is correctly in
-
stalled and connected. See the rele
-
vant section under "Installation".
Also check that the fluff filter is se
-
curely tightened. Otherwise there is
a risk of water leakage during use.
For safety reasons spinning is not pos
-
sible until the machine has been pre
-
pared for using for the first time. To acti
-
vate the spinning function you must run
a wash programme without any laundry
and without detergent.
Using detergent could result in an ex-
cessive build-up of foam.
This also activates the ball valve. The
ball valve prevents detergent escaping
from the suds container into the sump
during a wash programme, thus making
maximum use of the detergent.
^ Turn on the stopcock.
^
Press the I-ON/0-OFF button in.
^
Turn the programme selector to
COTTONS 40°C.
^
Press the START button.
When this programme has finished turn
the programme selector to "Finish". Your
washing machine is ready for using for
the first time.
Before using for the first time
12