Miele w864 Washer User Manual


 
Water plus system
The
Water plus
button offers four op
-
tions, increasing water level and / or
bringing in an extra rinse cycle. To
activate the option press the
Water
plus
button when selecting your wash
programme before pressing the
START button.
Option 1
Increase in the rinse water level in the
COTTONS, MINIMUM IRON, QUICK
WASH and MIXED WASH -
Poly/Cottons
programmes, where for ex-
ample rinse results are particularly im-
portant.
Option 2
Increase in the water level in all stages
of the COTTONS, MINIMUM IRON,
QUICK WASH and MIXED WASH -
Poly/Cottons
programmes. It is particu-
larly suitable for fabrics that need spe-
cial care, or where extra attention must
be given to dissolving detergent. This
option is already set when the machine
is delivered from the factory.
Option 3
An extra rinse cycle is introduced to the
Cottons programme, e.g. when rinse re
-
sults are particularly important.
Option 4
Increase in the water level in all stages
of the COTTONS, MINIMUM IRON,
QUICK WASH and MIXED WASH -
Poly/Cottons
programmes and adds an
extra rinse cycle to the COTTONS
programme, e.g. when rinse results are
particularly important.
Before the "Water plus system" pro
-
grammable function can be selected
you must first select programming
mode.
Selecting programming mode
AThe machine must be switched off
and the drum door closed. The
programme selector must point to
Finish
.
BPress the additional option buttons
Short
and
Water plus
at the same
time and hold pressed in and:
C. . . switch the machine on with the
I-ON/0-OFF-button.
DLet go of all these buttons.
The indicator light
Main wash
flashes in
the sequence display.
Selecting the programmable function
To select the "Water plus system" pro
-
grammable function turn the
programme selector to - Separate
rinse. The indicator lights in the se
-
quence display correspond to the four
options available. As Option 2 has been
set at the factory, when the programme
selector is turned
Separate rinse
, the in
-
dicator light for Option 2
Rinse hold
will
come on.
Programmable functions
32