Filter
Top Products
Memory function
If an extra option is selected for a
programme, and / or the spin speed
is altered, the machine stores these
changes in memory at the start of a
programme.
When that particular programme is
chosen again, the washing machine will
display the extra option and / or spin
speed which have been stored for that
programme in the memory.
The machine is delivered with the
memory function deactivated.
Follow steps A to G to programme
and store in memory.
Before you begin, ensure that:
– The washing machine is switched off.
– The machine door is closed properly.
– The programme selector is at Finish.
A Press the Start button and keep it
pressed in whilst carrying out steps
B-C.
B Switch the machine on with the _
button.
C Wait until the indicator light for the
Start button lights up constantly . . .
D . . . and then release the Start
button.
E Turn the programme selector to
Minimum iron 60°C.
A P will flash in the display alternating
with the number 0 or 1.
0 = deactivated.
1 = activated
F Each subsequent press on the Start
button selects a different setting.
The number flashing in the display
indicates the option selected.
G Switch the washing machine off
using the _ button.
Programmable functions
63