Filter
Top Products
The wash programme stops and a fault code appears in the
display.
Problem Possible cause Remedy A
The Check inlet/
drainage light flashes
and F10 or F11 shows
in the display.
The water outlet is
blocked.
Clean the drain filter and the
drain pump as described in
"Problem solving guide –
Opening the drum door in the
event of a blocked drain
outlet and/or a power failure".
The drain hose has
been fixed too high.
The maximum delivery head
is1m.
The water inlet is
blocked.
Open the stopcock.
The filter in the water
inlet hose is dirty
Clean the filter.
The water safety system
has reacted.
Call Miele Service.
The fault code FXX
shows in the display.
There is a fault. Start the programme again. If
the fault code appears again,
contact Miele Service.
A To switch off the fault indicator: Switch the washing machine off with the _
button and turn the programme selector to Finish.
Problem solving guide
39