Filter
Top Products
Final spin speed
Programm U/min
Cottons Hygiene 1800
Cottons Universal 1800
Minimum Iron 900
Delicates 600
Automatic 900
Quick wash 1600
Woollens 1200
Silks 400
Starch 1500
Separate rinse 1200
Spin 1800
Denim 900
Shirts 600
Outer wear 800
You can reduce the final spin speed.
You cannot select a final spin speed
higher than that shown in the chart
above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected in the
Cottons Hygiene
and the
Cottons
Universal
programmes, an additional
rinse is introduced.
To omit the final spin (Rinse hold)
^
Select
Rinse hold
from the
Extras
sub-menu. The laundry will not be
spun and will remain suspended in
the final rinse water. This reduces
creasing if the laundry is not going to
be removed from the drum immedi
-
ately after the end of the programme.
–
To start the final spin
:
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the
Start
button.
– To end the programme
:
Press the a button. The water will
drain away. Press the door button a
again, to open the door.
To omit rinse and interim spin and
the final spin
^ Select
Without spin
from the
Extras
sub-menu. The laundry is not spun
after the final rinse. The water will
drain away and the machine will go
straight into the anti-crease stage. An
additional rinse is introduced if this
setting is selected with the
Cottons
Hygiene
,
Cottons Universal
,
Minimum
Iron
,
Automatic
and
Quick wash
programmes.
Spinning
26