Filter
Top Products
You can use the timer to set the end time of a programme.
You can also delay the start of a programme from 30 minutes
up to a maximum of 24 hours, allowing you to make use of
night-time economy electricity rates, for example.
To open the Timer sub-menu
COTTONS UNI. 60°C 1800 rpm
Duration: 1:06 h
Extras
H
Timer Y
H
Detergent
H
Back A
H
^
Press short cut button 2.
To select a delay start time
You can enter the end time for a programme in 30 minute
stages.
COTTONS UNI. 60°C 1800 rpm
15:03
Start:
15:03
Finish:
15:30
^ Use the multi-function selector to select the programme
end time (when the first 30 minute stage is entered, the
programme end time will be adjusted to the next full or half
hour). Confirm your selection. The start of the programme
will now be delayed in parallel with the programme end
time you have selected.
To start the timer
^
Press the
Start
button.
The delay start time will be shown counting down in minutes.
To cancel the timer
^
Press short cut button 4.
The actual load size can only be determined accurately by
the machine once the programme has started. The
programme end time may, therefore, be a bit later or
earlier than first indicated.
Timer
25