Filter
Top Products
Before using the machine for the first time ensure that it is
correctly installed and connected. See "Installation and
connection". Also check that the drain filter is securely
tightened to prevent the risk of water leaks during use.
The washing machine has a sensor which measures the
amount of laundry in the drum. This determines the amount
of detergent required. To allow the load size indicator to
function correctly, you must first run a wash programme
without any laundry
and without detergent.
^
Open the stopcock.
^
Press the s button in.
If the washing machine is being switched on for the first time,
the welcome screen will appear.
The welcome screen will not appear again once a
programme lasting longer than 1 hour has been
completed.
Reminder to remove transport struts
To avoid the risk of damage, the transport struts must be
removed before the washing machine is used for the first
time. See "Installation and connection" for instructions on
how to do this.
^
Remove the transport struts (if this has not already been
done by your fitter). Then confirm that you want to continue
by pressing short cut button 4.
Setting the time of day
12:00
Set time of day.
^
Set the hour with the multi-function selector and confirm
this setting. Now set the minutes. Once this has been
confirmed, the time of day is saved in memory and the
display goes back to the entry menu.
Before using for the first time
12