Filter
Top Products
To cancel a programme
You can cancel a programme at any
time after it has started.
^
Press the
Start/Stop
T button.
The suds will be pumped away and the
programme is cancelled.
If you want to remove the laundry:
^
Press the
Door
button.
If you want to select a different
programme:
^
Switch the washing machine off with
the
I-On/0-Off
button.
^ Switch the machine back on again.
To interrupt a programme
^ Switch the washing machine off with
the
I-On/0-Off
button.
To continue with the same programme:
^ Switch the machine on with the
I-On/0-Off
button.
To change a programme
To change the programme or alter
the temperature
After the start of a programme it is no
longer possible to select a different
programme.
It is possible to alter the temperature up
to five minutes after the start of a
programme.
If you want to select another
programme or alter the temperature
(more than five minutes after the start of
a programme) you will need to cancel
the programme and begin again.
To change the spin speed:
^ Press the OK button.
The spin speed will be shown
highlighted. You can use the – and +
buttons to change the spin speed up
until the final spin begins.
Changing EXTRAS
The buzzer can be switched on or off
after a programme has started.
It is possible to select or de-select the
Intensive and Water plus EXTRAS up to
five minutes after the start of a
programme.
Please note that changes are not
possible if programme locking has
been activated.
Changing the programme sequence
30