Filter
Top Products
F Start the programme
^
Press the flashing
Start/Stop
T
button.
The estimated programme duration will
appear in the display. This will count
down in one minute steps. During the
first 10 minutes the washing machine
measures how much water is being
absorbed by the laundry. The
programme duration may be longer or
shorter depending on this absorbency
rate.
The programme sequence is also
shown in the display. The washing
machine shows you when each section
of the programme is reached.
The drum lighting switches off once the
programme has started.
G Remove the laundry
Anti-crease
and
Finish
will flash
alternately in the display to indicate that
the programme has finished.
^
Press the
Door
button to open the
drum door.
^
Remove the laundry.
Make sure that the drum is empty.
Items left in the drum could
discolour other items in the next
wash or become discoloured
themselves.
^
Check the folds in the door seal for
any small articles, e.g. buttons which
might be lodged there.
^ Turn the programme selector to the
Stop
position.
^ Switch the washing machine off with
the
I-On/0-Off
button.
^ Close the drum door. Otherwise there
is the danger of objects being placed
inadvertently in the drum. If these
remained unnoticed and were
washed in the next load, they could
damage the laundry.
How to wash correctly
18