Calibrating to zero at the end of a
programme
^
Turn the programme selector to the
Stop
position.
^
Open the drum door.
^
Switch the washing machine off.
^
Switch the machine back on again.
^
Turn the programme selector to the
Cottons 95°C
position.
^
Press and hold the
Load/Detergent
button until the following appears in
the display:
i
Zero setting
OK
The accuracy of the calibration
device will improve over the first few
programmes. At first it will drop a
little. For this reason, please re-
calibrate the sensor to zero after
each of the first few wash cycles.
^
Turn the programme selector to
Stop
and switch off the washing machine.
Before using for the first time
12