This washing machine has fully
electronic controls with automatic load
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate. This means
that programme cycles and durations
can vary.
The programme sequences outlined
below are based on the basic
programme with a full load. Extras
which can be selected have not been
taken into account.
The programme sequence display
shows the stage the programme has
reached.
Special features in the programme
sequences:
Anti-crease:
At the end of every programme, with
the exception of
Woollens
, the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
The door can be opened and laundry
removed at any time during the anti-
crease phase.
1)
A third rinse is carried out if:
–
there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected.
–
Without spin
has been selected
2)
There is a spin after the main wash
and between the rinses.
3) A third rinse is carried out if:
Without spin
has been selected
4)
In the
Outdoor
programme laundry is
only spun after the main wash.
Programme sequence
28