Filter
Top Products
Running your first programme
Your washing machine is now ready for
the first programme to be run.
15:00
Select programme
^
Press the programme button for
Cottons Universal
.
^
Press the
Start/Stop
button.
^
At the end of the programme switch
the machine off.
The load sensor must then be
calibrated to zero as you would with
bathroom scales.
Calibrating the load sensor to zero
^
Switch the washing machine on.
^
Open the drum door.
^
Press the programme button for
Cottons Universal
.
^
Press and hold the
Load/Detergent
button until the following appears in
the display:
i
Zero setting
OK
^ Switch the washing machine off.
The drum settles a little during the
first few washes and will take 3 or 4
wash cycles to reach its true position.
For this reason, please re-calibrate
the sensor to zero after each of the
first few wash cycles.
The machine is now ready for use.
Before using for the first time
12