Filter
Top Products
Final spin speed
Wash programme rpm
Cottons Universal 1600
Minimum Iron 900
Delicates 600
Cottons Hygiene 1600
Woollens 1200
Silks 400
Quick wash 1600
Automatic 900
Separate rinse 1200
Outer wear 800
Denim 900
Shirts 600
Starch 1500
Spin 1600
You can reduce the final spin speed.
You cannot select a final spin speed
higher than that shown in the chart
above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected in the
Cottons Hygiene
and the
Cottons
Universal
programmes, an additional
rinse is introduced.
To omit the final spin (Rinse hold)
^
Select the
Rinse hold
setting. The
laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
–
To start the final spin
:
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the
Start/Stop
button.
– To end the programme
:
Press the
Door
button. The water will
drain away. Press the
Door
button
again, to open the door.
To omit rinse and interim spin and
the final spin
^ Select the
Without spin
setting. The
laundry is not spun after the final
rinse. The water will drain away and
the machine will go straight into the
anti-crease stage. An additional
rinse is introduced if this setting is
selected with the
Cottons Hygiene
,
Cottons Universal
,
Minimum Iron
,
Quick wash
and
Automatic
programmes.
Spinning
20