Filter
Top Products
Set memory function
The electronics memorizes any
selected program with extra options.
The duration of a Smoothing program
will also be stored in memory.
These settings will be used for the
next drying. They can be accepted,
or changed by using the buttons.
For programming and saving in
memory, follow steps A to E.
The programmable function is
programmed using the buttons.
Precondition:
– The dryer is switched off.
– The door is closed.
A Press Start/Stop and keep it pressed
it during steps B-C.
B Press the I-On/0-Off button in.
Wait until the Start/Stop button lights up
continuously ...
C . . . then release the Start/Stop
button.
D Press the Gentle button twice.
–
The Gentle indicator light flashes
briefly six times.
–
P and 0 flash alternatingly in the
display (default setting).
The number appearing alternatingly
with P means:
I Memory
(Express indicator light also flashes)
0 no Memory
(default setting)
E Pressing the Start/Stop button
switches from one to the other.
F Using the I-On/0-Off button, switch
the dryer off.
The programming is now stored in
memory. You can change it again at
any time.
Programmable functions
48