Filter
Top Products
Ventilating the installation area
Function of Miele condenser dryer:
The condenser dryer separates the
mixture of water and laundry (the
wet load) into water and dry laundry
itself.
The water is heated / evaporated,
then condensed and collected into
condensed water container.
The remaining dry laundry remains
in the drum.
Operation of Miele condenser dryer:
The dryer circulates some air
(trapped with wet laundry inside a
reversibly rotating drum) via lint
filters, heat exchanger and heaters,
in a closed loop.
The heat exchanger (condenser)
needs cooling, so the dryer
circulates also ambient air, through
separate channels across heat
exchanger, in an open loop. ( these
two loops do not mix).
Returning ambient air warms up the
room with dry heat.
Practically all energy, taken from the
electrical wall outlet, remains in the
room as dry heat.
You must therefore take measures,
especially in small rooms, to provide
sufficient ventilation, by opening
windows for instance. Otherwise,
longer running times may be
expected.
Before transport at a later date
After every drying, a small quantity of
condensed water will collect in the
pump area. This condensed water can
leak out when the dryer is tipped. We
therefore recommend starting the
Timed cold program for about one
minute before transport
. Residual
condensed water will be drained into
the condensed water container or out
through the drain hose.
Installation and connection
39