Filter
Top Products
Problem Cause Solution
Filter/Vent indicator
light goes on.
The indicator light shows
that the dryer is not
operating at its most
efficient or economical.
Possible causes:
Blockage by lint or
detergent residues.
–
As a rule, it is sufficient
to clean the lint
screens and door filter.
Should that not be
sufficient, then check
all possible causes
listed under "The
drying cycle goes on
too long or even
switches off."
Canceling test
message:
–
Open and close door
You can deactivate the
Filter/Vent indicator light
(see section on
"Programmable
functions").
Canceling a program
Filter/Vent indicator
light goes on.
Possible causes and
remedies are described
above.
Canceling the fault
message:
– Open and close door
– Start a program.
–
If the fault message
comes back, call
Customer Service.
Container indicator light
goes on.
The buzzer sounds.
The condensed water
container is full or there is
a kink in the drain hose.
–
Empty the condensed
water container.
–
Check the drain hose.
Canceling test
message:
–
Open and close door
Trouble shooting
30