Filter
Top Products
Adjusting buzzer volume
The buzzer has two volumes.
For programming and saving in
memory, follow steps A to E.
This function is programmed using the
buttons.
Precondition:
–
The dryer is switched off.
–
The door is closed.
A Press Start/Stop and keep it pressed
it during steps B-C.
B Press the I-On/0-Off button in.
Wait until the Start/Stop button lights up
continuously ...
C . . . then release the Start/Stop
button.
D Press the Gentle button once.
– The Gentle indicator light flashes
briefly four times.
–
P and 0 flash alternatingly in the
display (default setting).
The number appearing alternatingly
with P means:
0 Buzzer normal
(default setting)
I Buzzer loud
(Express indicator light also flashes)
E Pressing the Start/Stop button
switches from one number to the
other, and you simultaneously hear
the buzzer setting.
F Using the I-On/0-Off button, switch
the dryer off.
The programming is now stored in
memory. You can change it again at
any time.
Programmable functions
47