Miele T 7634 Clothes Dryer User Manual


 
Other faults
Problem Cause Solution
The drying
process goes on
too long or even
switches off.
Even after the lint
screen is cleaned,
the Filter/Vent
indicator come
on.
Please check all possible causes and switch the dryer
off and then on again.
Insufficient ventilation,
perhaps because the
installation space is too
small.
Open a door or window and
let in increased air flow.
The door lint filter is blocked
with lint.
Remove the lint.
The vent ducting or its outlet
is blocked with lint.
Check all components of
the venting (such as the
wall pipe, external grill,
elbows and bends, etc.)
for unimpeded air flow.
Remove the lint.
Clothes were insufficiently
spin-dried.
In future, spin textiles in the
washer at a higher rpm.
The dryer is overloaded. Verify the maximum load for
each drying program.
Metal components such as
zippers have prevented the
moisture level of the laundry
from being determined
accurately.
In future, open the zippers.
If the problem recurs, in
future dry garments with long
zippers using the Timed
warm program.
The laundry was
not satisfactorily
dried.
The load consisted of various
fabrics.
Re-dry with Timed warm.
Next time, select a suitable
program.
Trouble shooting
25