Filter
Top Products
Switching over from a running
program
As a protection against unintentional
changes, program selection is no
longer possible.
To be able to choose a new program,
you must cancel the current program.
- Canceling and selecting a new
program
^
Press the Start/Stop button.
The load will be cooled down for a
few minutes, until a specific drying
time and temperature have been
reached.
If you press the Start/Stop button
again, the drum stops, End appears
in the display.
^ Switch the dryer off.
^ Then, switch it on again.
^ Select and start a new program im-
mediately.
- Interrupting a program and
removing laundry
^
See below: "Loading or removing
laundry".
^
Turn the dryer off after closing the
door.
Loading or removing laundry
^
Press the Door button.
^
Open the door.
,
Danger of burning:
Do not touch the back of the drum
when adding or removing items.
Temperatures in the drum area can
be high.
^
Add or remove laundry as needed.
^
Close the door.
^
Press the Start/Stop button.
Time remaining
When the program sequence is
changed, the time remaining as shown
by the display may differ from the
actual drying time.
Changing the program sequence
19