Filter
Top Products
Brief instructions
The operating steps identified with
numbers(A, B, C, ...) may be used as
short-cut instructions.
A Preparing the laundry
Loosen the washed garments and sort
them by: . .
. . . desired drying level,
. . . type of fabric and finish,
. . . size,
. . . same residual moisture content
after spinning.
This will produce very even drying.
,
Remove foreign objects like
detergent dispensing devices from
the laundry. They can melt and
damage the dryer and the wash.
– Check hems and seams to ensure
that linings don't come out.
– Close duvet covers and pillowcases
to prevent small items from getting
inside.
–
Fasten hooks and close buttons.
–
Tie fabric belts together.
B Turn on the dryer
You may also switch the dryer on after
loading it, as the drum will not be
illuminated, to save energy.
^
To turn it on, press the I-On/0-Off
button.
C Loading the dryer
^
Press the Door button to open.
^
Place the laundry loosely in the drum.
Do not exceed maximum loads
specified in the "Program Overview"
Section.
Overloading may cause wear and
tear on the laundry and adversely
affects drying.
^
Before closing the door, check that
the lint filter is properly inserted in the
door casing.
Ensure that no small items are
jammed in the door, because they
might otherwise be damaged.
Proper drying
12