Filter
Top Products
What to do, if...?
You can remedy most problems yourself. In many cases you can save time and
expense, since you will not have to call in customer service.
The following tips should help you locate and remedy the cause of a problem.
Please note the following:
,
Repairs to electrical appliances should only be carried out by qualified
professionals. Work performed by unqualified persons can place the user at
considerable risk.
Test and fault messages.
Problem Cause Solution
Cancelling a program
0 and End appear in
the display
The buzzer sounds.
This is not a fault.
The electronics recognizes
that there is no laundry in
the drum and cancels the
program.
Drying of single or already
dried laundry items can
also lead to program
cancellation.
In future, dry individual
laundry items with the
Timed warm program.
Cancelling test message:
– Open and close door
0-§ appears in the
display.
Gentle indicator light
flashes.
The lock function has been
activated.
If you wish to dry, you must
disable the lock function
(see "Electronic lock
function").
Cancelling a program
The buzzer sounds.
Flashing display may
show Cold air or End.
The cause is not immedi
-
ately obvious.
–
Switch the dryer off and
then on again.
–
Start a program.
If program interruption and
error message occur, a
fault is present. Contact
Miele customer service.
Trouble shooting
23