Filter
Top Products
Airways indicator
Fluff should be removed after drying.
The Clean out airways indicator will
remind you to clean the filters when a
certain amount of fluff has collected.
You can decide at what level of fluff
this reminder should be given.
You will have an idea of how often this
should be done after a few drying
programmes.
Normal
Factory default
Light
Clean out airways appears when there
is only a small build-up of fluff
Off
Clean out airways does not appear
Heavy
Clean out airways only appears when
there is a heavy build-up of fluff
A tick L will appear beside the option
to show that it has been set.
Lock code
The lock code prevents your machine
being used without your knowledge.
When the code has been activated, you
have to enter a code after switching the
dryer on. Otherwise the dryer cannot be
operated.
To activate the lock code
Lock code
Activate
Continue
OK
^ Press the right hand Menu button
under OK.
^ The display will now request that a
lock code is entered. The lock code
is 250 and cannot be altered.
To enter the lock code
Lock code
0 __
-
OK
^
Enter the first number with the left
hand Menu button under -. Confirm
your selection of this number by
pressing the right hand Menu button
under OK. Now enter the second
number.
^
Repeat the process until all three
numbers have been entered.
Settings menu J
57