Filter
Top Products
Installation site
,
Make sure the dryer door can be
opened without hindrance after
installation.
Building under a continous worktop /
in a kitchen run
This tumble dryer is specially designed
for installation under a continuous
worktop run in a fitted kitchen.
N = Niche height (820-930 mm)
It is supplied fitted with a cover plate
instead of an appliance lid. The
cover plate is necessary to ensure
electrical safety and must not be
removed.
When moving the dryer do not hold it
by the door.
–
The slides (available to order) should
be used to protect the floor from
damage when the dryer is pushed
into position or taken out for
servicing.
– The electrical socket must be located
in an accessible position near the
machine.
Please note:
Niche height Accessory
820 mm None required
from 830-840 mm Fit longer screw feet* (set to
approx. 40 mm)
from 870-885 mm Use one raising kit*
from 915-930 mm Use two raising kits*
* optional accessory
The dryer must not be used without
the front panel in place.
If the kitchen run has a continuous
furniture plinth in place, a gap must
be made for the tumble dryer.
Installation
41