Filter
Top Products
Once a programme has started
- changing the programme
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
If an attempt is made to change a
selection, Option not possible will
appear in the display.
It is still possible to select or deselect
the Buzzer and the Anti-crease extra
option.
You will need to cancel the current
programme before you can select a
new one.
- cancelling the programme and then
selecting a different programme
^ Press the Start/Stop button.
The "Stopped" option Cancel
programme will appear in the display.
^
Confirm by pressing the right hand
Menu button under OK.
The items will be cooled down,
depending on the temperature
reached and how long they have
been dried for.
If you press the Start/Stop button
during the cooling down phase and
confirm by pressing the right hand
Menu button under OK, Finished will
appear in the display.
^
Switch the dryer off.
^
Switch the dryer on.
^
Select another programme and start
it.
- cancelling the programme and then
removing the laundry
^
Proceed as described in "Adding or
removing laundry after a programme
has started" below.
^
Switch the dryer off after closing the
door.
Adding or removing laundry
after a programme has started
^
Press the Door button.
^
Open the door.
,
Danger of burning:
Do not touch the back of the drum
when adding or removing items. The
drum and the items can get very hot.
^ Add or remove items as required.
^ Close the door.
^ Press the Start/Stop button.
Time remaining
The time left shown in the display may
now vary from the actual drying time.
Changing the programme sequence
25