Filter
Top Products
Changing the standard drying
level in the Automatic
programme
The drying level for this programme is
set at a standard level.
You have the option of changing this
to an increased drying level.
The dryer is delivered with the drying
level set at Normal
You can change this to Hand iron
(damper) or Normal+ (drier than the
standard drying level).
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at Finish.
APress the Start button and keep it
pressed in whilst carrying out steps
B-C.
BSwitch the dryer on with the
I-On/0-Off button.
CWait until the Start indicator lamp
lights up constantly . . .
D. . . and then release the Start button.
ETurn the programme selector to the
Automatic position.
F Pressing the Start button alters the
drying level.
–
If the Drying indicator lamp flashes
twice:
the standard drying level is
Normal+
–
If the Drying indicator lamp is not
flashing:
the standard drying level is Hand
iron
–
If the Drying indicator lamp flashes
once, the drying level has not been
changed and will remain on the stan
-
dard setting (Normal).
Whilst doing this, the Cool air indicator
lamp will flash on and off, alternating
with 1 long flash and 3 short flashes.
GSwitch the appliance off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check:
^
Make sure the dryer is switched off,
the door is closed and the
programme selector is at Finish and
then carry out steps A to E.
The Drying indicator lamp will show you
if the drying level has been changed.
^
Switch off the dryer.
The check is complete.
Programmable functions
46