Filter
Top Products
Altering the residual moisture
level in the Minimum iron
programmes
The tumble dryer is designed to dry
effectively using as little energy as
possible.
However, if you require the laundry to
be drier, it is possible to reduce the
default residual moisture level in the
Minimum iron programmes.
Please note that programme
durations will be longer if this option
is activated.
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at Finish.
APress the Start button and keep it
pressed in whilst carrying out steps
B-C.
BSwitch the dryer on with the
I-On/0-Off button.
CWait until the Start indicator lamp
lights up constantly . . .
D. . . and then release the Start button.
ETurn the programme selector to the
Cottons Low temperature position.
FPressing the Start button switches
between activating and deactivating
the drier setting.
–
If the Drying indicator lamp is
flashing, the drier setting is
activated
–
If the Drying indicator lamp is not
flashing, the drier setting is not
activated and the residual moisture
level is on the standard default
setting.
Whilst doing this, the Cool air indicator
lamp will flash three times.
GSwitch the appliance off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check:
^ Make sure the dryer is switched off,
the door is closed and the
programme selector is at Finish and
then carry out steps A to E.
The Drying indicator lamp will show you
if the drier setting has been selected.
^
Switch off the dryer.
The check is complete.
Programmable functions
41