Filter
Top Products
Check and fault indicator lights:
Problem Possible cause Remedy
The programme has
stopped, the
Anti-crease/Finish
lamp
has come on in the se
-
quence display and the
buzzer is sounding.
This is not a fault. The electronics register whether
there is laundry in the drum after the start of a COT
-
TONS or MINIMUM IRON programme. If the drum is
empty the programme is stopped. The programme
will also be stopped if the laundry is dry when the
programme is started or if you are trying to dry an in
-
dividual item. Use the Timed drying programme
(Warm air) to dry individual items.
The programme has
been interrupted, the in
-
dicator lamp for
Hand
iron
or
Machine iron
is
flashing, and the buzzer
sounds.
There is no obvious
cause.
–
Switch off the dryer.
–
Then switch the dryer
back on and start the
programme again.
If the programme stops
again and an indicator
lamp flashes, there is a
fault. Contact the Miele
Service Department.
Problem solving guide
21