Filter
Top Products
Installation
Transporting the machine to its
installation site
When moving the machine you can
hold it by the lid where it protrudes to
the rear of the dryer. To manoeuvre the
dryer out of its packing case to its in
-
stallation site you will also need to hold
it by the front feet.
Aligning the machine
The machine must be perfectly level to
ensure safe and proper operation.
^
The screw feet can be adjusted to
compensate for any unevenness in
the floor.
A ventilation gap of at least 10 mm
must be maintained between the
bottom of the machine and the floor.
It must not be blocked by deep pile
carpets, plinths, etc, which would
prevent a sufficient intake of cold air.
Installation
25