Filter
Top Products
Anti-crease
If laundry is not removed as soon as
the programme has finished, the
drum will continue to rotate at
intervals for two hours to prevent
creasing.
The anti-crease function
–
is activated when the tumble dryer is
delivered. You can shorten the
duration of the anti-crease phase or
deactivate it if wished.
–
is used in all programmes except
Woollens handcare.
– should be left activated.
Follow the steps (A,B,C ...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
–
The programme selector is at Finish.
APress the Start button and keep it
pressed in whilst carrying out steps
B-C.
BSwitch the dryer on.
CWait until the Start indicator lamp
lights up constantly...
D. . . and then release the Start button.
ETurn the programme selector to
Cottons Normal.
The Cool air lamp will flash three times.
The flashing sequence of the
Drying lamp shows which option is
currently selected.
–
If the Drying lamp is not flashing:
Anti-crease is deactivated
–
If the Drying lamp flashes once:
Anti-crease will last for 1 hour
–
If the Drying lamp flashes twice:
Anti-crease will last for 2 hours
(factory default setting).
FPressing the Start button switches
between the 3 options.
GSwitch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^
Carry out steps A to E.
^
Switch the dryer off after checking
the setting as described above.
Programmable functions
44