Filter
Top Products
Altering the standard drying
level in the Automatic
programme
The drying level for this programme
is set at a standard Normal level.
You have the option of changing this
to an increased Normal+ (drier than
Normal)ortoHand iron (damper than
Normal) drying level.
Follow the steps (A,B,C ...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at Finish.
APress the Start button and keep it
pressed in whilst carrying out steps
B-C.
BSwitch the dryer on.
CWait until the Start indicator lamp
lights up constantly...
D. . . and then release the Start button.
ETurn the programme selector to
Machine iron.
The Cool air lamp will flash six times.
The flashing sequence of the
Drying lamp shows which option is
currently selected.
–
If the Drying lamp is not flashing:
the standard drying level is Hand
iron
–
If the Drying lamp flashes once: the
standard drying level will remain
on the Normal setting (factory
default setting).
– If the Drying lamp flashes twice:
the standard drying level is
Normal+.
FPressing the Start button switches
between the 3 options.
GSwitch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^
Carry out steps A to E.
^
Switch the dryer off after checking
the setting as described above.
Programmable functions
46