Filter
Top Products
Before you begin, ensure that:
–
The tumble dryer is switched off.
–
The door is closed.
–
The programme selector is at Finish.
APress the Start button and keep it
pressed in whilst carrying out steps
B-C.
BSwitch the dryer on.
CWait until the Start indicator light
lights up constantly...
D. . . and then release the Start button.
ETurn the programme selector to
Woollens handcare.
The Cooling down light will flash eight
times.
The flashing sequence of the
Drying light shows which option is
currently selected.
–
If the Drying light is not flashing:
On has been selected.
–
If the Drying light flashes once:
Factory default. Not in current
programme has been selected.
– If the Drying light flashes twice:
Off has been selected.
FPressing the Start button switches
between the 3 options.
GSwitch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^
Carry out steps A to E.
^
Switch the dryer off after checking
the setting as described above.
Programmable functions
49