Filter
Top Products
Problem Possible cause Remedy
There are humming
noises.
The compressor is
operating.
These noises are quite
normal and do not indicate a
fault.
The display and the
sensors are not lit up
and the Start sensor is
flashing slowly.
The display and sensor
illumination switch off to
save energy.
–
Touch the Start sensor.
The display and sensors
will light up.
–
See "Settings menu,
Display / keypad
illumination".
The programme does
not start.
No obvious cause.
–
Is the dryer switched on?
–
Is the plug correctly
inserted into the socket
and switched on?
– Is the door closed
properly?
– Has the fuse or circuit
breaker tripped?
– If you cannot remedy the
problem, then there could
be a fault. Contact Miele
Service.
Power cut. When power is restored, any programme which was
running will restart automatically.
The display is in a
different language.
A different language
has been selected.
Set the language you want.
The flag symbol J will guide
you.
The interior drum
lighting does not
come on.
The lighting switches
off automatically (to
save energy).
–
Switch the dryer off and
then on again.
–
If the lamp needs to be
replaced, follow the
instructions in "Changing
the lamp" at the end of this
section.
Access via a code has
been activated.
–
When the code is entered
the lighting will come back
on.
Problem solving guide
51