Filter
Top Products
Buzzer
When the buzzer function has been
activated, an audible tone sounds at
the end of a programme.
Off
Factory default
The buzzer is switched off but sounds
at maximum volume if there is a fault.
Normal
The buzzer sounds at the end of a
programme.
Loud
The buzzer sounds louder at the end of
a programme.
Keypad tone
An audible tone sounds each time a
button is pressed.
Off
Factory default
On
Brightness
Contrast
The display contrast and brightness
can be altered in stages.
The bars
PPPPPPPshow you
which level is set.
If you make an alteration it will appear
in the display immediately.
Display / keypad illumination
The display and sensor illumination
switches off to save energy.Start
flashes slowly to save energy.
The display and the sensors are not
illuminated.
–
if a programme is not selected within
10 minutes of the tumble dryer being
switched on.
– 10 minutes after the end of a
programme.
Press the Start sensor to activate the
display and sensor illumination again.
Off after 10 minutes
The display and sensor illumination will
switch off 10 minutes after the
programme has started.
"On" whilst programme is running
Factory default
The display and sensors remain lit up
whilst the programme is running.
Settings menu
69