Filter
Top Products
Problem Possible cause Remedy *
,
Clean out airways
appears after a
programme has
been cancelled.
The laundry is
not properly dry.
The cool air intake
panel is blocked.
–
Move any objects, such as
a laundry basket, away
from the grille.
The temperature in
the room has risen
sharply.
To prevent the heat
pump overheating,
the dryer has
cancelled the drying
process with a
cooling down phase.
–
Open a door or window to
keep the room temperature
down.
–
Wait until the room has
cooled down before
restarting the programme.
An excessive amount
of fluff has built up.
–
Check and clean the
surfaces of the fluff filters
and the fine filter.
Use a vacuum cleaner dusting
brush or small crevice nozzle
to vacuum up any soiling
carefully:
– From the heat exchanger
unit, bottom left (see
"Cleaning and care").
A prompt which has not
been described
previously appears in
the display.
A programme cannot
be started while there
is a fault message in
the display.
– Follow the instructions in
the display.
–
If a programme still cannot
be started, call Miele Ser
-
vice.
* To delete a fault message: Switch the dryer off and then on again.
Problem solving guide
48