Filter
Top Products
Airways indicator
Fluff should be removed after drying.
The
Clean the filters
message will
remind you to clean the filters when a
certain amount of fluff has collected
in the filters. You can decide at what
level of fluff this reminder should be
given.
You will have an idea of how often this
should be done after a few drying
programmes.
Off
Clean the filters
does not appear
Heavy
Clean the filters
only appears when
there is a heavy build-up of fluff
Normal
Factory default setting
Light
Clean the filters
appears when there is
only a small build-up of fluff
A tick
L will appear beside the
language to show that it has been set.
Lock
The system lock prevents your
machine being used without your
knowledge.
When the system lock has been
activated, you have to enter a code
after switching the dryer on. Otherwise
the dryer cannot be operated.
The door is not locked and can be
opened at any time.
To activate the lock
^ Select
Activate
and confirm your
selection.
^ The display will now request that a
code is entered. The code is 250 and
cannot be altered.
To enter the lock code
The code is: 250
0 __
Enter lock code
^
Use the + button to enter the first
number. Confirm your selection of
this number by pressing the
OK
button. Now set the second number.
^
Repeat the process until all three
numbers have been entered.
^
After the last number has been
entered, press the
OK
button.
Settings menu J
50