Filter
Top Products
Problem Possible cause Remedy
The programme
does not start and
the display is dark.
No obvious cause.
–
Is the dryer switched on?
–
Is the plug correctly inserted
into the socket and switched
on?
–
Is the door closed properly?
–
Has the fuse or circuit
breaker tripped?
The interior drum
lighting does not
come on.
The lighting switches off
automatically (to save
energy).
Switch the dryer off and then
on again.
The lamp needs
changing.
Change the lamp as described
at the end of this section.
The display is in a
different language.
A different language has
been selected in
"Settings J" "Language
J".
Set the language you want.
The flag symbol will guide you.
The Start/Stop
button light flashes
when a programme
is being selected.
This is not a fault.
The flashing indicates
that a programme can
be started.
After the programme has
started, the flashing will
change to a constant light.
The display is dark
and the light ring
around the
programme selector
is not lit up.
The Start/Stop
button light flashes
slowly.
The display has switched
off automatically to save
energy (Stand-by mode).
The same applies to the
programme selector.
The display or programme
selector are lit up after
pressing a button or turning
the programme selector.
The programme selector
light goes out when the
Settings
menu has been
selected.
The programme selector light
lights up when a programme is
selected.
If the problem persists,
there is a fault.
Contact the Miele Service
Department.
Problem solving guide
35