Filter
Top Products
Anti-crease
Once a programme has ended, the
drum will turn at regular intervals for
approx. 60 minutes to prevent the
laundry from settling into creases or
folds.
The "Anti-crease" function
–
is activated as standard when the
machine is delivered but can be
deactivated if wished.
–
it is effective in COTTONS, MINIMUM
IRON programmes, and Warm air
timed drying.
– if laundry is not normally removed
immediately after the end of a
programme you should leave it
activated.
Programming and
storing in memory
The programmable functions are
activated to call up further features not
shown on the control panel by using the
additional option buttons in
combination with the programme
selector.
Before you begin, first ensure that:
–
The tumble dryer is switched off.
–
The door is closed.
–
The programme selector is at
Finish
.
A Press the additional option buttons
Short
and
Low temperature
at the
same time, hold pressed in and ...
B ... switch on the dryer with the
I-On/0-Off
button.
C Let go of all these buttons.
–
"P" will appear in the display.
–
The
Drying
and
Cool air
indicator
lights will flash.
D Turn the programme selector to
COTTONS , Hand iron r.
E The number of the programmable
function will flash alternately with the
"P" on the left
of the display -
P: P...4...P... 4... .
The number on the right
will show
constantly:
0 = Anti-crease function off
1 = Anti-crease function on
F Press the
Start
button to change the
number on the right from
0 to 1 =on
or from
1 to 0 =off
.
The setting you have selected is now
stored in memory.
G Switch the machine off with the
I-On/0-Off
button.
To check:
^
Carry out steps A to E.
^
Switch off the dryer.
The check is complete.
Programmable functions
50