Filter
Top Products
Problem Possible cause Remedy
The programme stops
and the "Clean out
airways" indicator lamp
flashes.
Possible causes and remedies are described above
in ‘The "Clean out airways" lamp comes on.’
No obvious cause.
–
Switch the dryer off.
–
Switch the dryer back
on and start the
programme again.
If the programme stops
again and the "Clean out
airways" indicator lamp
flashes, there is a fault.
Contact the Miele Service
Department.
The "Anti-crease/Finish"
indicator lamp flashes
while drying is in
progress.
The programme selector
was moved after the
beginning of a
programme. The
programme continues to
run as normal.
Turn the selector back to
the original position and
the lamp will go out.
The programme is
interrupted and the
indicator lamp "Machine
iron" or "Hand iron"
flashes and the buzzer
sounds.
There is no obvious
cause.
– Switch the dryer off.
– Switch the dryer back
on and start the
programme again.
If the programme stops
again and an indicator
lamp flashes, there is a
fault. Contact the Miele
Service Department.
Problem solving guide
27