Language J
The display contents can be shown
in different languages.
The displayed language can be set in
the sub-menu "Language" J.
^
Select the desired language and
confirm with "OK".
The flag behind the word "Language" is
a guide to find the settings menu in
case a foreign language is shown.
If the language setting was changed, it
is only valid for the current wash
program. Once the program ends, the
display will show the language which is
set under "Settings - Supervisor level".
Water plus
In the setting "Water plus" you can
select an extra setting from below.
Water plus
The water level increases (more water)
in the wash and rinse cycles of the
program (delivery status).
Additional rinse
An extra rinse cycle is added in the
programs "Cottons Hygiene", "Cottons
Uni." and "Minimum iron".
Water+ and Add. rinse
The water level is increased in the wash
and rinse cycles and an extra rinse
cycle is added to the programs
"Cottons Hygiene", "Cottons Uni." and
"Minimum iron".
Suds cooling
Cold water is added at the end of
the main wash to cool the wash
water.
Suds cooling is carried out when a
wash temperature of 158°F (70°C) or
more is selected.
Suds cooling should be activated when
the drain hose is hung into a sink, to
prevent scalding.
Suds cooling is factory set turned on.
Settings J
61