Filter
Top Products
Standby
To save energy, the programme
sequence/check lights go out and
the indicator light for the Start button
starts flashing slowly.
To come out of standby mode
^
Turn the programme selector or
press the Start button. Neither will
have any effect if a programme is
running.
On
The standby function is activated and
the programme sequence/check lights
will go out after 10 minutes:
– if a programme is not selected after
the dryer has been switched on.
– after a programme has started.
They will, however, come on for 10
minutes at the end of the programme or
the end of the anti-crease phase. The
buzzer (if selected ) will sound for 10
minutes at the end of the programme.
Factory default. Not in current
programme
As described under "On" above.
However, they will stay on after the
programme has started and remain
visible during the programme.
Off
The programme sequence/check lights
will stay on while the dryer is switched
on.
Follow the steps (A,B,C ...) to
programme and store in memory.
^ See next page.
Programmable functions
50