Filter
Top Products
Anti-crease
If laundry is not removed as soon as
the programme has finished, the
drum will continue to rotate at
intervals for two hours to prevent
creasing.
The anti-crease function
–
is activated when the tumble dryer is
delivered. You can shorten the
duration of the anti-crease phase or
deactivate it if wished.
–
is used in all programmes except
Woollens handcare.
– should be left activated.
Follow the steps (A,B,C ...) using
the Start button and programme
selector to programme and store in
memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
–
The door is closed.
–
The programme selector is at Finish.
A Press the Start button and keep it
pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
C Wait until the Start indicator light
lights up constantly...
D . . . and then release the Start button.
E Turn the programme selector to
Cottons Normal.
The Cooling down light will flash three
times.
The flashing sequence of the
Drying light shows which option is
currently selected.
–
If the Drying light is not flashing:
Anti-crease is deactivated
–
If the Drying light flashes once:
Anti-crease will last for 1 hour
– If the Drying light flashes twice:
Anti-crease will last for 2 hours
(factory default setting).
F Pressing the Start button switches
between the 3 options.
G Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^
Carry out steps A to E.
^
Switch the dryer off after checking
the setting as described above.
Programmable functions
46