Filter
Top Products
Altering the residual moisture
level in the Cottons
programme
The tumble dryer is designed to dry
effectively using as little energy as
possible.
However, if you require the laundry to
be drier or damper, you can reduce
or increase the default residual
moisture in the Cottons programme.
Follow the steps (A,B,C ...) using
the Start button and programme
selector to programme and store in
memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at Finish.
A Press the Start button and keep it
pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
C Wait until the Start indicator light
lights up constantly...
D . . . and then release the Start button.
The Cooling down light will flash once.
The flashing sequence of the
Drying light shows which option is
currently selected.
–
If the Drying light is not flashing:
the residual moisture level will be
increased and laundry will be
damper.
–
If the Drying light flashes once: the
residual moisture level will remain
on the Standard setting (factory
default setting).
– If the Drying light flashes twice:
the residual moisture level will be
reduced and laundry will be drier.
E Pressing the Start button switches
between the 3 options.
F Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^
Carry out steps A to D.
^
Switch the dryer off after checking
the setting as described above.
Programmable functions
44