Filter
Top Products
Drying level cottons
Drying level min. iron
You can alter the drying levels for the
Cottons and Minimum iron
programmes.
The bar chart shows you the setting.
Factory default: a medium setting.
–
rrr (damper)
The programme duration is shorter.
–
r (drier)
The programme duration is longer.
Extended cool down
The cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to handle.
Factory default: 0 mins (normal cooling
down period)
You can select an extended cool down
time in 2 minute increments up to a
maximum of 18 minutes.
You cannot extend the cooling down
time for the Warm air, Cool air, Woollens
handcare, Silks handcare or Smoothing
programmes.
Airways indicator
Fluff should be removed after drying.
The Clean out airways message will
remind you to clean the filters when a
certain amount of fluff has collected.
You can decide at what level of fluff
this reminder should be given.
You will have an idea of how often this
should be done after a few drying
programmes.
Off
Clean out airways does not appear
Heavy
Clean out airways only appears when
there is a heavy build-up of fluff
Normal
Factory default
Light
Clean out airways appears when there
is only a small build-up of fluff
Programmable functions
49