Filter
Top Products
Rear view
aProtruding lid for holding when
moving the machine (see arrows)
bAir inlet vent for cooling the
condenser unit
cMains connection cable
dExternal drainage of the condensed
water
eAccessories for connection to a sink
drain outlet
Installation site
,
Make sure the dryer door can be
opened without hindrance after
installation.
,
The machine lid must not be
removed.
,
The machine must not be built
under.
Transporting the machine to its
installation site
When moving the machine, you can
hold it by the lid where it protrudes to
the rear of the dryer. To manoeuvre the
dryer out of its packing case to its
installation site you will also need to
hold it by the front feet.
Installation and connection
39